5 Reasons Keurig Not Pumping Water | Problem Solved

Keurig coffee maker has made our lives much easier and faster. We just place our K-Cup, fill the reservoir with water, and with just one click, hot brewed coffee is ready. But what if is Keurig not pumping water, everything will be finished. 

But don’t worry, if your coffee maker Keurig not pumping water, take these steps. 

  1. There is an issue with the water line and filter. 
  2. Water lines have Air space.
  3. The water pump is may be damaged.
  4. You need to add more water to the reservoir. 
  5. You need to descale the Keurig coffee maker. 

Don’t worry if these steps look confusing. I’m going to explain why is Keurig not pumping water, the reason for this problem, and how to fix them. Just follow the guide, and let’s solve this issue. 

5 Reasons Keurig Not Pumping Water and Their Solutions

Keurig Not Pumping Water

1. Water Line or Filter Have Debris (Clogged)

One of the most common causes of a Keurig not pumping water is a clogged filter or water line. This usually happens when there is something blocking the flow of water, such as food particles, dirt, or even mold. 

To fix this issue, make sure that all parts are washed thoroughly with warm soapy water and check for any visible debris in the lines. If necessary, replace any parts that appear to be damaged or clogged with new ones. 

2. Water Lines has Got The Air

Due to air bubbles in the lines, the Keurig pump can stop working. To get rid of this issue, try running some clean water through your machine several times. 

Running 2-3 cycles remove any air pockets that may have built up over time. You can also use a syringe with clean tap water to flush out any air bubbles if necessary.

3. The Water Pump is Damaged Somehow 

There are many reasons that the water pump in Keurig coffee maker can get damaged. So, if none of the above simple fixes seem to work, then it’s possible that there is an issue with your machine’s pump itself. 

In this case, you may need to replace the water pump entirely in order for it to work properly again. The process of removing and installing is pretty much simple. 

Make sure that you purchase one from an authorized retailer and follow all instructions carefully during installation. In order to prevent further damage to your machine. 

4. You Need to Add More Water 

Sometimes we forget how much water our machines actually need. If your tank appears empty even after refilling it multiple times, then it could mean that you need to add more than just a few extra ounces. 

Because the Keurig coffee maker only works with hot water and a K-cup. Where if the water is insufficient it will not bring out the coffee. So make sure, the water is sufficient in the reservoir. 

Moreover, you’ll also get a notification on screen, or a specific alarm tune will notify you that water is less than the requirements.  

5. Keurig Coffee Maker Requires Descaling 

A Keurig machine that isn’t working properly could also be due to mineral deposits or calcium buildup inside its pipes or other components over time (known as “scale”). 

Try using a descaling solution designed specifically for coffee makers like yours according to its manufacturer’s instructions. 

Descaling is the last solution that’s why I mention it last. However, before descaling, you can consult with a professional.

Descaling your machine will make sure that your coffee maker is cleaned properly, and that there is no debris, air space, or filter clogged in the brewer.  

Why is Keurig Not Pumping Water From Reservoir?

Here are the three most common reasons that can cause Keurig not to pump water from the reservoir.

1. Clogged Needles

When using your machine, some of the coffee grounds may get stuck in the needle and prevent it from being able to pump water through. 

To check for clogs, remove the needle cap on top of your K-Cup holder and use a paperclip or similar object to clean out any blockages. 

2. Low Water Level

If there is a low water level in the water tank, then Keurig may not pump water perfectly. If you don’t fill up the reservoir enough, then there won’t be enough pressure to push the water through the system. 

Check the water level manually. Ensure that your reservoir has enough water before proceeding. 

3. Dirty Parts

There is also a possibility that some of the parts inside your Keurig are dirty or clogged with debris or old coffee grounds. This can prevent the coffee maker from working properly.

So it’s important to check each part and make sure they are clean and free from any debris buildup before using them again. It may even be necessary to replace some parts if they have become worn or damaged. 

Watch in Action: How To Fix – Keurig Not Pumping Water

How to Fix Keurig Not Dispensing Enough Water?

If your newly bought Keurig coffee maker is not dispensing enough water to make coffee, here are a few steps to fix this issue. 

  • Turn off the machine, and remove the electric plug. 
  • Remove the water reservoir. 
  • Clean it with hot water using a soft cloth. 
  • Leave the water tank for 5 minutes to let it dry completely. 
  • Install the water reservoir. 
  • Turn on the machine.
  • Give your machine two water cycles.
  • Your problem will be solved. 

Following this method, you can make sure that your machine is pumping enough water. Giving it water circles will make sure that the machine has clean and clear water lines, and filter is working. 

Conclusion

Troubleshooting a Keurig not pumping water can seem overwhelming at first. But thankfully there are plenty of simple solutions available out there depending on what caused the issue.

You can try any method like cleaning filters or removing air bubbles. The best method at the end “descaling the Keurig coffee maker” will also be helpful. 

Overall, there are multiple ways to solve this problem. Just make sure you know the root of the cause. In the end, you can also contact Keuring support. Or ask your question in the Keurig community for better answers.