Breville Clean Descale Light Stays ON

Breville Clean Descale Light Stays ON (Problem Solved)

Breville is one of the most reliable espresso machines on the market. One of its reputed features is the error indication through lights. Clean descale light is one of them. There could be some time when this Breville clean descale light stays ON. Let’s see why it happens.

The Breville clean descale light stays on because the descaling process or cleaning process was not completed perfectly. It could mean that some step was missed in the process and you will need to redo it perfectly to get rid of it. So, simply descale or clean your machine again and it will be all good.

Further in this article, you will learn more about the light staying ON in a Breville espresso machine. So, make sure that you read it till the end so you will not miss any steps.

How Do You Turn OFF The Clean Descale Light?

If the Breville clean descale light stays on even after descaling or cleaning the machine, it means that the process did not complete perfectly. 

To turn the light OFF, you will simply have to descale or clean your espresso machine all over again from the start. 

If you do not know what you missed in the descaling process, do not worry, further ahead I will tell you the proper procedure to descale or clean your Breville espresso machine.

Step-by-Step: How To Descale Your Breville Espresso Machine?

Breville Clean Descale Light Stays ON

Things you need

The first step is to acquire the things necessary to get started with the descaling process. If you do not have these things, then the descaling process of your machine will not move further. To turn off the Breville clean descale light you need the following things to start the descaling process. 

  • Descaling solution
  • Fresh and Warm water.
  • A piece of cloth

Pour The Descaling Solution

For the process to start, you will need to pour the solution into the machine. For this, you will have to empty the water tank along with the drip tray. Now, put the descaling solution in the tank and close the machine.

Activate The Descale Mode

In this step, you will activate the ‘descale’ mode of your espresso machine. To do so, simply press and hold two-cup and power buttons on the machine simultaneously. You will have to hold it for about 5 seconds or so. 

Once done, the machine will enter the descaling mode and it will indicate this by turning ON all the light indicators on the interface.

Rinse The Machine

The machine will take less than a minute to complete the descale cycle. Once it is done, you will have to take out the used descaling solution from the outlet. After that, pour some fresh warm water into the water tank and start the brew cycle to rinse the machine.

Keep repeating the steps until the machine is fully free of any residue or coffee remains. That should complete the descaling process of your machine and hopefully turn OFF the clean descale light. Also, use the cloth to wi[e out any residue on the outside of the machine.

Bottom Line: After the proper descaling, your Breville clean descale light should turn off quickly. Just make sure you follow the complete SOPs of descaling.  

Watch This Video: Breville Clean Descale Light Stays ON

Step-by-Step: How To Clean Your Breville Espresso Machine?

How To Clean Your Breville Espresso Machine? Breville Clean Descale Light Stays ON

Get The Things Required

Just as the same as the descaling process, you will need to get some things necessary for this process as well. The list of those things is as follows;

  • Cleaning Disk
  • Cleaning Tablets
  • Nylon Brush
  • Fresh Warm Water

Insert The Cleaning Disk And Tablets

For the first step, take out the filter basket of your Breville’s portafilter. After that insert the cleaning disk along with the cleaning tablets in it inside the filter basket. Once done, put the filter basket back where you took it out from.

Start The Cleaning Cycle

To put the Breville espresso machine, you will need to press and hold the single-cup, two-cup, and power buttons on the interface simultaneously for about 5 seconds. 

The machine will indicate the activation of the cleaning cycle through a light sequence indicator. Now, the machine has entered the cleaning cycle.

Perform The Checks

The checking is for the cleaning tablets inside the filter basket. Once the cycle is complete, open the basket and see if the tablets have been completely consumed or not. 

If they are still there, keep the cycle going until they are completely consumed. Also, use the Nylon brush to wipe and clean the outside of the machine.

Restart The Machine

Once the cleaning cycle and the process itself are done, you will need to restart the machine by unplugging it and leaving it for about 5 minutes. After that, plug it back in, and voila your Breville espresso machine is completely cleaned now.

Frequently Asked Questions (FAQs)

What If The Breville Clean Descale Light Stays ON Even After Redoing The Process?

In some rare cases, it is possible that your Breville espresso machine’s clean descale light could still remain ON. In this case, do not get worried, it just means that the problem is internal to the machine. This error could not get resolved all by yourself. For this, you can call for professional help.

The most convenient and optimal one would be to call the Breville support line and ask for assistance. If the error is minor, they would guide you over the call, otherwise, they will send over a professional hand to help you out. So, rest assured.

Why Does the Breville Clean Descale Light After Descaling?

There could be different reasons for the light to be staying ON after descaling in Breville. One of the reasons is that the machine did not get fully descaled and some step was missed. 

You could get rid of this by simply descaling the machine again. The second reason for this could be that the machine was not correctly rinsed with fresh water after descaling. It would start working fine by rinsing it again.

How do I turn OFF the descaling mode?

If your espresso machine is in descaling mode and you want it out of it, you can do it simply by pressing and holding the descaling button and the lever of the machine simultaneously. 

Keep on holding this for almost 10 seconds. After this keep the machine rest for about 20 minutes and unplug it. Once you plug it back in, it will be out of descaling mode.

Is descaling necessary?

Yes, descaling your espresso machine is one of the most crucial things to keep your machine maintained. The descaling gets rid of all the residue and remains of coffee oil in the machine. 

This assures that the machine’s functionality is not hindered by any such physiological issues. So, make sure you descale your espresso machine every once in a while to keep it going.

Conclusion

Breville is without a doubt, one of the best espresso machines. But, they could run into some problems anytime. The light indicators really come in handy in situations like these. 

Whenever you see your Breville clean descale light is ON, do not worry, it is just an error that could be resolved by you. 

So, follow the steps given in this article and fix the issue of descaling yourself without paying even a penny in the comfort of your own home.

You Can Also Read:

Tags :
Espresso Machines
Share This :

Leave a Reply

Your email address will not be published. Required fields are marked *